Plastic plate ABS - Acrylonitrile-butadiene-styrene
ABS has a high surface hardness, impact resistance and good oil resistance. Examples of the use of ABS are, as is known, motorcycle and vehicle parts such as trim, bumpers and covers, electronic parts, toys, musical instruments and consumer goods with increased demands on impact strength.
Acrylonitrile-butadiene-styrene (ABS) is a synthetic terpolymer. It consists of the three monomers acrylonitrile, 1,3-butadiene and styrene. ABS is dimensionally stable and can be easily sawn, drilled and cut. Coating with metals and polymers is also possible (e.g., chromium plated surfaces). ABS can be deep-drawn very well, due to its hygroscopic properties (up to 1.5% water absorption), sufficient drying should be ensured in advance. The melting point of ABS is approx. 230°C to 250°C, the continuous use temperature is max. 85 to 100°C.
Similar plastics: ASA - Acrylic ester-styrene-acrylonitrile, SAN - Styrene-acrylonitrile copolymer
Welding temperatures
Welding tool: 255 - 285°C
Hot air tool: 275 - 310°C
Extrusion: 275 - 300°C
Form: Flat Strength: 1 mm Color: White
Delivery quantity: 1 Plate 1000x1000mm
Technical data ABS - Acrylonitrile-butadiene-styrene
Aggregate state: solid
Density 1.04 to 1.12 g/cm3
Modulus of elasticity 1900-2700 MPa (DIN 53457)
Tensile strength 32 to 56 N/mm2
Thermal Conductivity 0.18 W/K m
Tensile elongation (DIN 53455): 15 to 30%
Linear expansion coefficient: 60-110 K-1 · 10-6
Specific heat capacity: 1.3 J/g K
Operating temperature: 85°C to 100°C
Electrical breakdown strength up to 120 kV/mm
Resistance to oils and greases
Temperature resistant
Resistance to weathering and aging
Identify ABS plastic
ABS - Acrylonitrile-butadiene-styrene
Recycling label

Flame test:
ABS burns with a vigorous flame. The smell is sweet.
! Take care not to inhale directly the flame sample. Do with a fanning action, to avoid health risks. . If possible inflame plastic not in closed rooms and do not burn them unnecessarily long.
Plastic welding plate ABS from az-reptec - Enables cost-effective repairs by welding with soldering iron and heat gun. For workshop, DIY, modeling and smartrepair.